Setting up your handlebar

Setting up your handlebar

Always pay attention for setting up your handlebar the right way because tis can ensure your safety and also the ideal handling of your bicycle. This short procedure only takes a few mintes...

Always pay attention for setting up your handlebar the right way because this can ensure your safety and also means that your bicycle will handle better. This short procedure only takes a few minutes, so it isn’t too time consuming but once it’s done you can be sure that your bike will handle fine.

Always be sure that the centre point of your handlebars is fitted in the middle of the stem clamp. This way your bar will be in the middle, this is one of the most basic settings.

The next most important setting is to have your bar set close to the ideal clamping angle, this way the horizontal rotation won’t be too much. Most manufacturers mark the centre point on the bar, which is very helpful for achieving the ideal setting. Thanks to this setup you won’t apply too much pressure on your wrists and the handling also will be much better.

 

Tip

·         Make small adjustments rather than large ones

·         Be sure the stem clamp bolts are tightened equally and the recommended amount (this is often marked by the manufacturer

·         Always put assembly grease onto the bolts and in between the stem plate and the handlebar. 

21 10:11:38 SEP 15/